Characteristics of polyester mesh

Polyester  screen printing mesh, also  known as ester screen.
 Polyester mesh has the following characteristics: small  tensile elongation, soft, Monofilament polyester screen printing mesh,  used for silkscreen printing of integrated circuits, thick film  semiconductors, scale plates, counting plates and other high-precision prints;  tensile strength, Structural strength, resilience and printing resistance are  better; it has sufficient chemical resistance, especially acid resistance, organic  solvent and strong corrosion resistance, and can be regenerated like nylon. Low  moisture absorption, almost no humidity; higher heat resistance than nylon,  less affected by ultraviolet rays than nylon. Pay attention to the following  points in use: polyester mesh is stable in size and suitable for  high-precision printing, so it needs more tension than nylon mesh, and requires  a stronger frame, stretching machine and stronger adhesion method; because  polyester is Hydrophobic, so it is difficult to bind esters with the plate  membrane. Pay attention to cleaning and degreasing before plate making. Despite  its low hygroscopicity, it cannot resist boiling water for a long time. Nylon  is slightly worse; it is not resistant to alkali corrosion.