Fiberglass Window Screen

Material:  High-density Polyethylene
Color:  Balck, Grey, Green,blue Or Customized
Weave:  Plain Weave And Twisted Weave
Width:  1.5 Meters Wide
Mesh Size:  14×14 16×16 18×18 Mesh
Use For:  For Window Screens

Features:
1、High tensile strength.
2、Good visibility and light transmittance
3、Fire resistance
4、Anti-static, no dust
5、Beautiful and generous shape, bright color and lustre of the mesh surface do not need paint coloring.
6、Don't leap into silk
7、Non-toxic and tasteless, in line with ISO14001 international environmental certification
8、Long service life, the outside of the product coated plastic products with corrosion resistance, weathering resistance, high temperature resistance, easy to clean durable, can be used for many times.
 
Advantage:
1、The standard tensile strength state is 6.3-6.9 g/d, and the wet state is 5.4-5.8 g/d.The density was 2.54 g/cm3.
2、Good heat resistance, had no effect on the temperature of 300 ℃.
3、Excellent electrical insulation, is a senior electrical insulation material, but also used for insulation materials and fire shielding materials.Generally only by concentrated alkali, hydrofluoric acid and phosphoric acid corrosion.
 
Product Specification Sheetsa:
 

Specification

 

Color:

gray

black

white

brown

gray/white

green

ivory

mesh size:

18*16

17*15

18*18

20*20

 

 

 

weight:

120g/m2

110g/m2

105g/m2

 

 

 

 

width:

any width from 50-300cm

length:

20m

25m

30m

50m

102m

 

 

 
Usage:
Step 1: assemble the yarn box, air groove and base, then screw it with six screws to make it a square frame.
Step 2: will screen window is put in installation place, the side distance that notices groove of left and right and door window frame wants left and right symmetrical, the place of the border that the position of the bottom is apart from door window frame wants low about 5cm, after putting, left and right sides are lived with clip, make it cannot move.
Step 3: drill holes on the inner side of the strap of the door and window frame with a 3.2mm drill.
Step 4: according to the need, make 6 to 14 holes in the corresponding places of the left and right air slots and the bottom below, and then screw on the screws to complete the installation.
 

Related Products